Structural Drying And Dehumidification

Dehumidification and Structural Dry Outs


Flood and storm damage could lead to long-term structural damage and mould problems if the drying process is not thoroughly completed. Depending on climatic conditions, floods occur in Australia’s different regions like QLD.
At times like that, The Mould Removers comes to your rescue. We quickly dehumidify your property, ensure that the entire structure is dry, and all our actions have been meticulously documented.
This procedure assures that our consumers are looked after and their homes are not going to have ongoing water damage issues.

Mould 5

Satisfaction Guarantee


The Mould Removal Team We work on jobs big and small.
We approach every project with the  same dedication to quality results.

Water Damage Removal (480x640)

Structural Damage


Our trained team can determine the consequences and damage to residential and commercial buildings due to mould growth and the components that make up their structural integrity. 

Water can spread and flow in seemingly unlikely places in a property, and if left undetected, secondary damage can quickly occur, causing future problems. If not dried efficiently, excess moisture can lead to permanent damage and mould growth on:

  • Furniture
  • Carpets and rugs
  • Fabrics and upholstered furniture
  • Insulation
  • Walls and floors
  • Woodwork

The only way to ensure that mould and its effects on the structure are identified, controlled and monitored until pre-damage conditions are restored is to have a structural drying management plan. Therefore, The Mould Removers ensures to provide the best services within a short period.

If you have a mould problem, , it really pays to call in the experts. The Mould Removers can find the source of your mould problem and make sure it doesn’t happen again.

Dehumidification and Structural Dry Outs


How to remove moisture from the walls?

Dehumidifiers can be used to pull moisture out of walls over time. However, you can speed up the drying time by using fans with high volume. These fans help evaporate water and make it easier for dehumidifiers to pull moisture out of the air.

Also, don’t rely on the sense of touch to determine if surfaces are dry. Instead, use a moisture meter to check if they are perfectly dehydrated. If a wall remains even slightly damp, it can cause further damage to the building structure and thus encourage mould growth. 

The Mould Removers use high-quality fans and dehumidifiers suitable for removing mould from floors and walls. We can deliver our construction dryers and dehumidifiers to your home on short notice.

Dehudification2

Why choose The Mould Removers for
dehumidification?


The best way to reduce wall moisture drying time; water damage dehumidifiers

1. Use the right dehumidifier – Use a commercial dry dehumidifier. It is designed to pull water out of walls and other objects.

2. Use high-powered fans  – These powerful fans speed up the drying process. They ensure that the water in the walls evaporates faster

3. Drain the unit regularly  – Dehumidifiers shut off when they reach capacity. Therefore, keep the unit running by draining it regularly. You can also add a drain those to keep the unit running continuously.

4. Set the relative humidity – When using a dehumidifier for home use, set the relative humidity to the lowest setting. This will prevent the unit from turning off and shorten the drying time

5. Remove items from the area – Wet furniture and personal items will slow drying time. Separate them and dry them in a different place.

At The Mould Removers, we can send your technicians to your home, install our equipment, monitor the progress, and pick up when the drying is complete.

Get a quote today call 0405 970 927