
Tiled home drying set-up
Dehumidifier and air mover drying wall frames after a water-damage strip-out.
Projects
Real strip-outs, drying and remediation work for homeowners, insurance builders and insurers across South East Queensland.

Dehumidifier and air mover drying wall frames after a water-damage strip-out.

Air mover and dehumidifier drying exposed timber frames and slab.

Multiple air movers and dehumidifiers drying a full ground-floor strip-out.

All internal linings removed, frames exposed and slab cleaned for remediation.

Wet-area linings removed and frames protected ready for the builder.

Contents and linings removed, slab cleaned and dried.

Linings removed and plastic barriers in place to control dust and spores.

Shower and wall linings removed back to the frame and brickwork.

Water-affected garage linings removed back to timber frame.

Lower linings removed with air mover drying the frames.

Wet-area linings removed back to frame for treatment and drying.

Linings removed under the stairs, frames exposed and protected.

Air movers and dehumidifier drying exposed timber frames and slab.

Commercial dehumidifier pulling moisture from frames after strip-out.

Air mover and dehumidification in a stripped-out bedroom.

Air movers and air scrubber running through an open-plan strip-out.

Equipment positioned to dry wall frames and slab to dry standard.

Dehumidifier and air movers drying a timber-frame home after flooding.

Steel-frame linings removed to flood line across the living area, slab cleaned.

Lower wall sheeting removed and slab cleared, ready for drying.

Frames exposed through the entry for drying and antimicrobial treatment.

Linings removed along every wall, room cleared for structural drying.

Internal walls opened up so frames and slab can dry and be treated.

Linings and fixtures removed back to the frame.

Plasterboard cut out to flood height through a commercial building.

Lower linings removed and frame exposed for drying.

Plasterboard removed to flood cut line, frames and slab HEPA cleaned and ready for drying.

Air movers and LGR dehumidifier with thermo-hygrometer readings logged each visit.

Full linings removed, frame exposed and room prepped for remediation and reinstatement.

Commercial dehumidifiers drying masonry walls and slab to dry standard.

Cabinetry and wall linings removed after a water event, ready for the insurance builder.

Thermal imaging and moisture meter tracing a concealed leak behind the wall.

Lower wall linings removed through the living area, slab cleaned.

Linings removed and frame exposed for drying and antimicrobial treatment.

Water-affected linings removed along hallway and wet area.

Water-damaged flooring and linings removed down to slab.

Masonry surfaces treated during mould remediation.
Send us your job details or call — homeowners, builders and insurers welcome.
0418 344 573